Likely birch plywood veneer; exact species is not identifiable from this narrow edge view. Alternatives include maple or another pale hardwood veneer.
Likely Betula spp.; species uncertain. · Engineered wood (likely plywood with a pale hardwood face veneer).
AI-generated identification · may be incorrect- Type
- Engineered wood (likely plywood with a pale hardwood face veneer).
- Origin
- Cannot determine from the image; birches grow across temperate and boreal regions of the Northern Hemisphere.
- Hardness
- Not reliably assignable to the panel. If birch: about 1,260 lbf (Hard).
- Durability
- Not reliably assignable; plywood durability depends on veneer species, adhesive, and grade.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
The visible strip shows fine, mostly straight grain; the broad face and end-grain structure are not clearly visible.
Color & Appearance
Pale golden-tan, fairly even in color, with mild natural variation; finish and lighting may affect its appearance.
Hardness (Janka)
Not reliably assignable to the panel. If birch: about 1,260 lbf (Hard).
Durability & Decay Resistance
Not reliably assignable; plywood durability depends on veneer species, adhesive, and grade.
Value & Age
Species and panel grade are unconfirmed; typical birch plywood varies roughly from $2–$8 per square foot, rather than being priced by board foot.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- No dependable age estimate; the clean edge shows no clear weathering or wear indicators.
Common Uses
Likely suitable for cabinetry, furniture, shelving, and interior panels, depending on panel grade.
Geographic Origin
Cannot determine from the image; birches grow across temperate and boreal regions of the Northern Hemisphere.
Workability
Likely cuts and sands readily with sharp tools; plywood edges may splinter, so use fine-tooth blades and seal exposed plies.
Finish Recommendations
Sand lightly and apply a compatible clear lacquer, polyurethane, or oil; test first because thin veneer is easy to sand through.
Notable Features
The photograph shows a thin, light-colored wood layer over what appears to be a panel; no distinctive figure or end grain is visible.