Mixed reclaimed hardwood offcuts; species cannot be reliably identified from this stacked-board photo. The reddish-brown pieces could include cherry or walnut, with lighter pieces possibly oak or maple.
Undetermined; possible species include Prunus serotina, Juglans nigra, Quercus spp., or Acer spp. · Likely reclaimed hardwood, but the stack may contain multiple species.
AI-generated identification · may be incorrect- Type
- Likely reclaimed hardwood, but the stack may contain multiple species.
- Origin
- Unknown. If North American species, likely sources include eastern North America, but the photo does not establish origin.
- Hardness
- Cannot assign a species-specific Janka value; plausible candidates range from about 950 lbf (cherry) to 1,450 lbf (hard maple).
- Durability
- Unknown for this mixed stock; durability differs substantially among candidate species and cannot be judged from appearance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, ordinary sawn grain is visible; cut orientation and species vary. End grain is not clear enough to assess pores or identify a species.
Color & Appearance
Ranges from pale tan to gray-brown and reddish brown, consistent with mixed stock and surface oxidation. Finish, sapwood, and heartwood are not reliably distinguishable.
Hardness (Janka)
Cannot assign a species-specific Janka value; plausible candidates range from about 950 lbf (cherry) to 1,450 lbf (hard maple).
Durability & Decay Resistance
Unknown for this mixed stock; durability differs substantially among candidate species and cannot be judged from appearance.
Value & Age
Highly variable; mixed short offcuts often sell for roughly US$1–6 per board foot, depending on species, dimensions, dryness, and condition.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not determinable from this image; weathered surfaces and saw marks do not establish age.
Common Uses
Small furniture, cabinetry, shelving, turning, and craft projects, after sorting pieces by species and condition.
Geographic Origin
Unknown. If North American species, likely sources include eastern North America, but the photo does not establish origin.
Workability
Varies by species and moisture content. Inspect for nails, dirt, checking, and warping; clean or metal-check before machining, then use sharp tools.
Finish Recommendations
Test a small area first; sand progressively and apply oil, shellac, or a clear film finish according to the desired color and use.
Notable Features
The main visible feature is mixed color and board sizes; no distinctive figure, end-grain structure, or species-specific feature is evident.