Uncertain; most likely weathered oak (Quercus spp.), with chestnut or another coarse-grained hardwood as alternatives.
Quercus spp. (tentative; species cannot be confirmed visually) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Oaks occur across the Northern Hemisphere; likely commercial sources include eastern North America or Europe.
- Hardness
- Species-dependent: white oak about 1,360 lbf (Hard); red oak about 1,290 lbf (Hard).
- Durability
- Variable by oak species: white oak is Durable; red oak is only Slightly Durable in ground contact. Weathering and insect holes make this specimen’s condition uncertain.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Coarse, irregular grain with apparent longitudinal pores; surface wear obscures figure and sawing orientation.
Color & Appearance
Weathered tan to medium brown with darker streaks; heartwood/sapwood distinction and original color are unclear. Little reliable luster is visible.
Hardness (Janka)
Species-dependent: white oak about 1,360 lbf (Hard); red oak about 1,290 lbf (Hard).
Durability & Decay Resistance
Variable by oak species: white oak is Durable; red oak is only Slightly Durable in ground contact. Weathering and insect holes make this specimen’s condition uncertain.
Value & Age
Roughly US$4–12 per board foot for ordinary rough oak lumber; this weathered, unidentified piece may have little or highly variable resale value.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from this image; surface weathering and small holes do not establish the wood’s age.
Common Uses
Oak is commonly used for furniture, flooring, cabinetry, joinery, barrels, and veneer.
Geographic Origin
Oaks occur across the Northern Hemisphere; likely commercial sources include eastern North America or Europe.
Workability
Generally machines and glues well, though coarse grain can tear out; predrilling helps with fasteners. Heavy surface erosion limits assessment.
Finish Recommendations
Clean and dry, then test a small area; sanding followed by oil, shellac, or clear varnish can suit oak. Fill pores if a smooth finish is desired.
Notable Features
The rough surface and small dark holes could reflect wear or insect activity; no clear end grain, rays, or distinctive figure is visible.