Likely red oak; white oak is a plausible alternative.
Quercus rubra (likely); alternatively Quercus alba. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Likely eastern North America; red and white oaks grow widely across the eastern United States and southeastern Canada.
- Hardness
- 1,290 lbf for northern red oak—Hard; white oak is about 1,360 lbf.
- Durability
- Moderately durable; red oak has limited decay resistance, while white oak is more rot-resistant. Indoor flooring is consistent with the pictured use.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Long, mostly straight grain with visible cathedral figure on flat-sawn boards; mixed board widths and tones suggest a strip floor. End grain is not visible.
Color & Appearance
Golden to medium reddish-brown with darker brown variation and aged finish; the photo does not clearly distinguish heartwood from sapwood. Oak typically darkens with age and light exposure.
Hardness (Janka)
1,290 lbf for northern red oak—Hard; white oak is about 1,360 lbf.
Durability & Decay Resistance
Moderately durable; red oak has limited decay resistance, while white oak is more rot-resistant. Indoor flooring is consistent with the pictured use.
Value & Age
Roughly US$4–9 per board foot for common kiln-dried oak lumber; installed or reclaimed flooring varies widely.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably estimate from a photo; surface wear and color indicate use, not a specific age.
Common Uses
Flooring, furniture, cabinetry, interior trim, and veneer.
Geographic Origin
Likely eastern North America; red and white oaks grow widely across the eastern United States and southeastern Canada.
Workability
Machines and finishes well, though open pores may need filling; red oak can splinter and may show planer tearout. Predrill near edges.
Finish Recommendations
Clean and lightly abrade before recoating; test compatibility, then use floor-grade polyurethane or hard-wax oil. Fill gaps only if appropriate for the floor.
Notable Features
Prominent open-pore grain and strong cathedral figure are characteristic of oak; species-level pores and rays are not resolved here.
