Likely American white oak, with possible red oak or white-oak flooring blend
Quercus alba (likely); alternatives include Quercus rubra and other Quercus species · Hardwood; domestic North American
AI-generated identification · may be incorrect- Type
- Hardwood; domestic North American
- Origin
- Eastern and central North America, especially the eastern United States and southern Canada.
- Hardness
- About 1,360 lbf Janka; Hard.
- Durability
- Moderately Durable; white oak generally resists decay better than red oak, but exposed end grain and wet conditions remain vulnerable.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, open-grained, flat-sawn boards with cathedral-like arcs; some irregular/wavy figure and visible medullary flecking may occur.
Color & Appearance
Pale cream to straw-colored heartwood and lighter sapwood, with subdued tan/brown variation. It should amber slightly with age and light; the image shows a matte unfinished or lightly finished surface.
Hardness (Janka)
About 1,360 lbf Janka; Hard.
Durability & Decay Resistance
Moderately Durable; white oak generally resists decay better than red oak, but exposed end grain and wet conditions remain vulnerable.
Value & Age
Approximately $5–$12 per board foot for common kiln-dried white oak; flooring pricing varies by grade and milling.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this image; it appears to be relatively recent flooring, with no clear antique patina or wear evidence.
Common Uses
Flooring, furniture, cabinetry, millwork, barrels, veneer, and general construction.
Geographic Origin
Eastern and central North America, especially the eastern United States and southern Canada.
Workability
Machines and sands well, though open pores and occasional interlocked grain can cause tear-out. Pre-drilling is advisable; it glues and finishes reliably.
Finish Recommendations
Use a penetrating hardwax oil, polyurethane, or lacquer after thorough sanding and pore cleaning; test finish color because pale oak ambers noticeably.
Notable Features
Prominent open pores, good dimensional stability, attractive cathedral grain, and strong visual variation between boards.
