Likely white oak; red oak is a plausible alternative. — Quercus alba (likely); possibly Quercus rubra.

Likely white oak; red oak is a plausible alternative.

Quercus alba (likely); possibly Quercus rubra. · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Likely eastern and central North America; white and red oak species are widespread there.
Hardness
White oak: about 1,360 lbf — Hard. Red oak: about 1,290 lbf — Hard.
Durability
White oak is Durable, with good decay resistance; red oak is Slightly Durable and less rot-resistant. Identification is uncertain.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, prominent linear grain with mild cathedral figure; likely flat-sawn. End grain is not visible, so rays and pore pattern cannot be confirmed.

Color & Appearance

Pale tan to light brown with subtle darker streaks; sapwood and heartwood are not clearly distinguishable. Appears unfinished, with little evidence of age-related darkening.

Hardness (Janka)

White oak: about 1,360 lbf — Hard. Red oak: about 1,290 lbf — Hard.

Durability & Decay Resistance

White oak is Durable, with good decay resistance; red oak is Slightly Durable and less rot-resistant. Identification is uncertain.

Value & Age

Estimated Market ValueNot an official valuation

Roughly US$5–12 per board foot for common kiln-dried oak; appearance, grade, and local prices vary.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot reliably estimate from the image; the clean, pale surface shows little visible patina or wear.

Common Uses

Cabinet doors, furniture, flooring, trim, cabinetry, and veneer.

Geographic Origin

Likely eastern and central North America; white and red oak species are widespread there.

Workability

Generally machines and finishes well; sharp tools help limit tearout, especially around the routed panel. Predrill for fasteners near edges.

Finish Recommendations

Sand evenly and use a clear oil, lacquer, or polyurethane; a pore filler can produce a smoother gloss finish.

Notable Features

Oak typically has conspicuous growth-ring grain and open pores; white oak has stronger natural moisture resistance than red oak.

Learn more about Likely white oak; red oak is a plausible alternative. in the Wood Encyclopedia
Identified October 8, 2026