Likely Western Red Cedar; alternatives include incense cedar or another red cedar.
Thuja plicata (most likely) · Softwood; commonly classified as a North American conifer.
AI-generated identification · may be incorrect- Type
- Softwood; commonly classified as a North American conifer.
- Origin
- Native mainly to coastal and interior British Columbia, western Washington and Oregon, northern California, and parts of Idaho and Montana.
- Hardness
- About 350 lbf Janka—Very Soft.
- Durability
- Durable to Very Durable outdoors; heartwood has good resistance to decay and insects, though sapwood is substantially less resistant and weathering causes silver-gray oxidation.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine and even textured grain with prominent flat-sawn cathedral patterns; small knots and occasional minor grain deviation are visible.
Color & Appearance
Heartwood ranges salmon-pink to reddish brown, while sapwood is pale cream to yellow. Color typically darkens and turns richer brown-red with age and light; the boards show fresh, relatively bright color.
Hardness (Janka)
About 350 lbf Janka—Very Soft.
Durability & Decay Resistance
Durable to Very Durable outdoors; heartwood has good resistance to decay and insects, though sapwood is substantially less resistant and weathering causes silver-gray oxidation.
Value & Age
Approximately US$5–12 per board foot for clear/select stock; common knotty construction-grade material is often about US$2–6 per board foot, varying by region and thickness.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Boards appear freshly milled or lightly seasoned, likely under several years old; no convincing evidence of reclaimed age is visible.
Common Uses
Exterior siding, shingles, trim, fencing, decking, garden structures, lightweight furniture, boat components, and acoustic applications.
Geographic Origin
Native mainly to coastal and interior British Columbia, western Washington and Oregon, northern California, and parts of Idaho and Montana.
Workability
Very easy to cut, plane, sand, glue, and fasten, but its softness permits dents and crushed fastener marks. Resin and uneven grain around knots may cause minor tearout.
Finish Recommendations
Use a penetrating exterior oil or stain for outdoor work, preferably with UV protection; clear finishes require maintenance. Seal end grain and test finishes because absorption varies between heartwood and sapwood.
Notable Features
Distinctive aromatic cedar scent, low density, dimensional stability, and good weathering performance; knots are frequent in this apparent grade.
