Most likely Douglas-fir; alternatives include western larch or another straight-grained softwood.
Pseudotsuga menziesii · Softwood (conifer)
AI-generated identification · may be incorrect- Type
- Softwood (conifer)
- Origin
- Pacific Northwest and western North America, from British Columbia south through California and inland into the Rocky Mountain region.
- Hardness
- 660 lbf Janka; Soft.
- Durability
- Slightly durable; heartwood has moderate decay resistance, while sapwood is vulnerable to rot and insects, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, narrow latewood bands with relatively coarse texture; likely flat-sawn or plain-sawn. No distinctive figure is visible.
Color & Appearance
Pale pinkish tan to light brown, with subtle growth-ring contrast; exposed wood appears weathered and gray-brown. Limited luster and no strong chatoyance.
Hardness (Janka)
660 lbf Janka; Soft.
Durability & Decay Resistance
Slightly durable; heartwood has moderate decay resistance, while sapwood is vulnerable to rot and insects, especially outdoors.
Value & Age
Approximately $3–8 per board foot for ordinary surfaced stock; clearer or premium old-growth material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The timber appears older or weathered, with oxidation, grime, and possible insect holes; visible evidence cannot establish its actual tree or board age.
Common Uses
Framing, beams, sheathing, flooring, doors, furniture, cabinetry, veneer, and general millwork.
Geographic Origin
Pacific Northwest and western North America, from British Columbia south through California and inland into the Rocky Mountain region.
Workability
Machines and sands well, though resin, knots, and uneven grain can cause tear-out or blade buildup; predrilling improves fastening.
Finish Recommendations
Sand progressively to about 150–180 grit, seal resinous areas if needed, then apply oil, lacquer, shellac, or polyurethane; a conditioner or wash coat can reduce blotching.
Notable Features
Lightweight, structurally strong for its weight, resinous, and commonly marked by prominent annual rings and occasional pitch pockets.
