Most likely rift- or quarter-sawn white oak; alternatives include red oak or weathered ash.
Quercus alba (likely); Quercus rubra or Fraxinus spp. possible. · Hardwood (temperate deciduous).
AI-generated identification · may be incorrect- Type
- Hardwood (temperate deciduous).
- Origin
- Eastern and central North America, especially the eastern United States.
- Hardness
- Janka about 1,360 lbf — Hard.
- Durability
- Durable; heartwood has good resistance to decay and insects, while sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, tight, and fine-textured with strongly elongated ray fleck; appears rift/quarter-sawn, with no obvious dramatic figure.
Color & Appearance
Weathered silver-gray to taupe-brown, with darker streaking and subdued luster. Fresh white oak is pale tan and typically darkens slightly with age.
Hardness (Janka)
Janka about 1,360 lbf — Hard.
Durability & Decay Resistance
Durable; heartwood has good resistance to decay and insects, while sapwood is less resistant.
Value & Age
Approximately $6–$14 per board foot for clear, kiln-dried white oak; figured or reclaimed material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The gray oxidation and surface wear suggest prolonged exposure or aging, but they cannot establish the tree’s age; likely a weathered finish rather than genuinely antique wood.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, and interior trim.
Geographic Origin
Eastern and central North America, especially the eastern United States.
Workability
Machines and sands well, though prominent rays can show tearout and open pores require filling for a smooth finish. Pre-drilling is advisable; gluing is generally straightforward.
Finish Recommendations
Clean and lightly sand, then use a conditioner or washcoat if staining; clear lacquer, polyurethane, hardwax oil, or oil will preserve the grain. A pore filler gives a flatter surface.
Notable Features
Visible medullary-ray fleck strongly supports quarter-sawn oak; oak has pronounced open pores and tannin-rich heartwood.
