Most likely red oak; alternatives include other oak species or red oak veneer/lamination. — Quercus rubra (probable)

Most likely red oak; alternatives include other oak species or red oak veneer/lamination.

Quercus rubra (probable) · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America, especially the United States and southern Canada.
Hardness
Janka approximately 1,290 lbf — Hard.
Durability
Slightly to moderately durable; interior oak is reasonably stable, but exposed untreated wood is vulnerable to moisture, rot, and insects.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, open-grained, flat-sawn board with subtle cathedral pattern; no clear special figure visible.

Color & Appearance

Pale pinkish-tan to salmon-brown, consistent with red-oak sapwood/heartwood; likely to deepen toward warm amber-brown with light exposure.

Hardness (Janka)

Janka approximately 1,290 lbf — Hard.

Durability & Decay Resistance

Slightly to moderately durable; interior oak is reasonably stable, but exposed untreated wood is vulnerable to moisture, rot, and insects.

Value & Age

Estimated Market ValueNot an official valuation

About $4–$10 per board foot for clear, surfaced red oak; local retail and unusually wide stock may differ substantially.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from this photograph; it appears freshly milled or lightly weathered rather than antique.

Common Uses

Furniture, flooring, cabinetry, millwork, trim, veneer, and general joinery.

Geographic Origin

Eastern and central North America, especially the United States and southern Canada.

Workability

Generally machines and sands well, though open pores and occasional grain reversal can cause tear-out; predrilling and quality glue joints are recommended.

Finish Recommendations

Sand evenly, fill pores if a smooth surface is desired, then use oil, shellac, lacquer, or polyurethane; test stain because oak can color unevenly.

Notable Features

Visible open pores and pink-red coloration support an oak identification; the image does not show diagnostic end grain clearly.

Learn more about Most likely red oak; alternatives include other oak species or red oak veneer/lamination. in the Wood Encyclopedia
Identified September 20, 2026

Encyclopedia

Learn about Most Likely Red Oak; Alternatives Include Other Oak Species Or Red Oak Veneer/lamination. in the encyclopedia

View all →