Likely beech; maple is a possible alternative, but the image is not sufficient for a reliable species-level identification.
Likely Fagus sylvatica (European beech) or Fagus grandifolia (American beech); exact species cannot be determined visually here. · Hardwood (angiosperm).
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm).
- Origin
- European beech is native to Europe; American beech to eastern North America.
- Hardness
- Beaches are about 1,300 lbf Janka—Hard; values vary by species and source.
- Durability
- Slightly durable; generally poor resistance to decay and outdoor weathering, with limited insect resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Fine, mostly straight grain with subtle irregularity; no distinctive figure is evident. End grain is not clearly shown, so ring and pore features cannot be assessed.
Color & Appearance
Pale cream to light tan with darker streaks and uneven gray-brown surface discoloration, possibly from wear or aging; finish and lighting affect appearance.
Hardness (Janka)
Beaches are about 1,300 lbf Janka—Hard; values vary by species and source.
Durability & Decay Resistance
Slightly durable; generally poor resistance to decay and outdoor weathering, with limited insect resistance.
Value & Age
Roughly US$4–9 per board foot for typical kiln-dried beech lumber; region, grade, and thickness change pricing.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from this image; surface marks and discoloration do not establish age.
Common Uses
Furniture, flooring, cabinetry, interior joinery, turning, and tool handles.
Geographic Origin
European beech is native to Europe; American beech to eastern North America.
Workability
Machines, sands, and glues well; its hardness can make hand work demanding, and interlocked grain may tear out. Pre-drilling is useful near edges.
Finish Recommendations
Sand evenly and apply shellac, oil, lacquer, or polyurethane; a conditioner or washcoat can help limit blotching with stain.
Notable Features
Fine, even texture and good steam-bending properties; the pictured surface appears worn or stained rather than clearly figured.