Likely White Oak; Red Oak is a plausible alternative.
Quercus alba (likely); Quercus rubra is possible. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- White Oak is native to eastern North America; Red Oak is widespread across eastern North America.
- Hardness
- 1,360 lbf for White Oak — Hard. Red Oak is about 1,290 lbf, also Hard.
- Durability
- Durable for White Oak heartwood, with good decay resistance; Red Oak is less resistant, especially outdoors. Species and heartwood content cannot be confirmed visually here.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent straight-to-wavy grain with cathedral figure in flat-sawn boards; lighter bands show conspicuous ray fleck consistent with quarter-sawn oak. The image shows installed flooring, not end grain.
Color & Appearance
Medium tan to brown with darker grain and lighter sapwood; likely stained or finished. Oak generally darkens and warms with age and light exposure; finish limits color assessment.
Hardness (Janka)
1,360 lbf for White Oak — Hard. Red Oak is about 1,290 lbf, also Hard.
Durability & Decay Resistance
Durable for White Oak heartwood, with good decay resistance; Red Oak is less resistant, especially outdoors. Species and heartwood content cannot be confirmed visually here.
Value & Age
Roughly $5–$12 per board foot for common kiln-dried oak; flooring pricing varies by grade, finish, and region.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably estimate from the photograph; flooring condition and patina do not establish the wood’s age.
Common Uses
Flooring, furniture, cabinetry, millwork, barrels, and veneer.
Geographic Origin
White Oak is native to eastern North America; Red Oak is widespread across eastern North America.
Workability
Machines and finishes well, though open pores require filling for a smooth finish; interlocked grain can tear out during planing. Predrill near edges to reduce splitting.
Finish Recommendations
Use a compatible stain or clear polyurethane, lacquer, or oil finish; test on an inconspicuous area because oak absorbs stain unevenly. Fill pores if a glass-smooth surface is desired.
Notable Features
Oak has visible pores and rays; quarter-sawn material displays fleck. The strong grain and mixed sawing patterns are characteristic of oak flooring.
