Likely oak (possibly white oak); species-level identification is uncertain from this image.
Quercus spp.; possibly Quercus alba · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Oaks occur across the Northern Hemisphere; white oak is native to eastern and central North America.
- Hardness
- White oak: about 1,360 lbf, Hard. Other oak species vary.
- Durability
- Moderately durable to durable; white oak heartwood resists decay and insects better than sapwood, but prolonged weathering can degrade it.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Coarse, mostly straight longitudinal grain with prominent growth-ring lines; the rough, curved edge may be natural or split. No clear decorative figure or end grain is visible.
Color & Appearance
Pale tan to light brown with darker reddish-brown areas at the damaged edge. Surface is rough and weathered; aging and light exposure may deepen or gray the color.
Hardness (Janka)
White oak: about 1,360 lbf, Hard. Other oak species vary.
Durability & Decay Resistance
Moderately durable to durable; white oak heartwood resists decay and insects better than sapwood, but prolonged weathering can degrade it.
Value & Age
Typical kiln-dried, usable oak lumber is roughly $5–$12 per board foot in the U.S.; this rough piece cannot be graded or valued from the image.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this single rough view; weathering alone does not establish age.
Common Uses
Furniture, flooring, cabinetry, barrels, construction, boatbuilding, veneer, and turning.
Geographic Origin
Oaks occur across the Northern Hemisphere; white oak is native to eastern and central North America.
Workability
Machines and glues well, though coarse grain can tear during planing; predrilling helps with fasteners. White oak’s hardness calls for sharp tools.
Finish Recommendations
Clean and sand to sound wood, then use oil, shellac, lacquer, or polyurethane; test first because uneven weathering can cause blotchy color.
Notable Features
Oak commonly has conspicuous growth rings and broad rays; white oak is especially valued for tight-grained, water-resistant heartwood.
