Most likely eastern white pine; other pale softwoods, such as spruce or fir, cannot be ruled out from this view. — Pinus strobus (tentative)

Most likely eastern white pine; other pale softwoods, such as spruce or fir, cannot be ruled out from this view.

Pinus strobus (tentative) · Softwood

AI-generated identification · may be incorrect
Type
Softwood
Origin
Eastern North America, especially the northeastern United States and southeastern Canada.
Hardness
380 lbf — Very Soft (typical eastern white pine value).
Durability
Slightly Durable; untreated wood has limited resistance to decay and insects, especially outdoors.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, relatively broad growth bands; rough split face obscures finer grain and cut orientation. No distinctive figure visible.

Color & Appearance

Freshly exposed wood is pale cream to light yellow-brown; the darker outer surface may be bark or weathered wood. Pine typically yellows and deepens with light and age.

Hardness (Janka)

380 lbf — Very Soft (typical eastern white pine value).

Durability & Decay Resistance

Slightly Durable; untreated wood has limited resistance to decay and insects, especially outdoors.

Value & Age

Estimated Market ValueNot an official valuation

Roughly US$2–6 per board foot for common, clear-to-knotty stock; highly dependent on grade and region.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Not reliably estimable from this image; the exposed split looks fresh, while the dark outer edge alone does not establish age.

Common Uses

Carpentry, interior trim, furniture, shelving, carving, and pattern stock.

Geographic Origin

Eastern North America, especially the northeastern United States and southeastern Canada.

Workability

Generally easy to cut, plane, sand, and fasten; soft fibers can dent or tear, and resinous knots may complicate finishing.

Finish Recommendations

Sand evenly and use a compatible sealer or conditioner before stain to reduce blotching; clear oil, shellac, or varnish are suitable.

Notable Features

Lightweight, usually straight-grained, and often resin-scented; the pictured surface does not show enough detail to confirm resin or growth-ring traits.

Learn more about Most likely eastern white pine; other pale softwoods, such as spruce or fir, cannot be ruled out from this view. in the Wood Encyclopedia
Identified September 25, 2026