Likely mixed, recently cut conifer firewood; Douglas-fir is one possibility, but the logs cannot be reliably identified to species from this image.
Unknown; possibly Pseudotsuga menziesii (Douglas-fir). · Softwood (probable); species uncertain.
AI-generated identification · may be incorrect- Type
- Softwood (probable); species uncertain.
- Origin
- Unknown from the image; Douglas-fir is native to western North America.
- Hardness
- Undetermined without species identification; Douglas-fir is about 660 lbf (Soft).
- Durability
- Undetermined; varies by species and heartwood. Bark, moss, and apparent outdoor storage do not establish decay resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Bark-covered round logs obscure most grain. Exposed ends show growth rings, but no diagnostic end-grain detail or distinctive figure.
Color & Appearance
Exposed wood ranges from pale tan to orange-brown, with darker weathering and moss on the bark. Freshly cut conifer wood may darken with oxidation and light exposure.
Hardness (Janka)
Undetermined without species identification; Douglas-fir is about 660 lbf (Soft).
Durability & Decay Resistance
Undetermined; varies by species and heartwood. Bark, moss, and apparent outdoor storage do not establish decay resistance.
Value & Age
Unpriced logs/firewood vary by region, species, dryness, and volume; no reliable per-board-foot estimate is possible from this image.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The logs appear freshly cut or relatively recently cut, but tree age and time since felling cannot be estimated from the visible surfaces.
Common Uses
If Douglas-fir: framing, construction lumber, flooring, and pulp; these pieces appear to be logs or firewood.
Geographic Origin
Unknown from the image; Douglas-fir is native to western North America.
Workability
Cannot assess as pictured; bark-covered logs are not prepared lumber. Douglas-fir machines reasonably well but can splinter or tear out.
Finish Recommendations
No finish recommendation without species and intended use; for milled wood, dry it appropriately and test finish on a small area.
Notable Features
Bark, moss, and irregular log shapes are visible; no reliable scent, resin, or acoustic traits can be determined.