Most likely Douglas fir; alternatives include southern yellow pine or larch.
Pseudotsuga menziesii · Softwood (conifer), likely clear-sawn construction/lumber stock.
AI-generated identification · may be incorrect- Type
- Softwood (conifer), likely clear-sawn construction/lumber stock.
- Origin
- Native to western North America, especially the Pacific Northwest and coastal/interior mountain regions.
- Hardness
- Janka approximately 620 lbf — Soft.
- Durability
- Slightly Durable; heartwood has limited decay resistance, while sapwood is vulnerable to insects and rot, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium grain with conspicuous earlywood/latewood bands; the face shows mild cathedral/irregular grain and no obvious decorative figure.
Color & Appearance
Pale cream to light pinkish-brown with darker reddish-brown growth lines; sapwood is light, and the wood typically warms and darkens slightly with age and light.
Hardness (Janka)
Janka approximately 620 lbf — Soft.
Durability & Decay Resistance
Slightly Durable; heartwood has limited decay resistance, while sapwood is vulnerable to insects and rot, especially outdoors.
Value & Age
Approximately $3–$8 per board foot for clear, dry stock; common construction grade may be $1–$3.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably determinable from the photograph; it appears recently milled, with no convincing patina or wear indicators.
Common Uses
Framing, beams, doors, trim, flooring, furniture, shelving, plywood, and general construction.
Geographic Origin
Native to western North America, especially the Pacific Northwest and coastal/interior mountain regions.
Workability
Machines and sands readily, though resin and alternating soft/hard growth bands can cause fuzzing or uneven planing; predrilling helps prevent splitting.
Finish Recommendations
Use a sanding sealer or conditioner before stain to reduce uneven absorption; clear polyurethane, lacquer, shellac, or penetrating oil are suitable.
Notable Features
Distinctive growth-ring contrast, relatively good strength-to-weight ratio, and a characteristic resinous conifer scent when freshly cut.
