Likely oak, most consistent with White Oak; Red Oak is a possible alternative.
Quercus alba (likely); possibly Quercus rubra or another oak. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Oaks are native across much of eastern North America; White Oak is especially common in the eastern and central United States.
- Hardness
- White Oak: about 1,360 lbf — Hard. Red Oak: about 1,290 lbf — Hard.
- Durability
- White Oak is Durable and naturally rot-resistant; Red Oak is less decay-resistant. The photo does not show enough end grain to confirm which oak.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Broad, mostly straight grain with visible growth-ring bands and small knots; appears flat-sawn. No distinctive decorative figure is evident.
Color & Appearance
Weathered light tan to gray-brown, with little visible sapwood/heartwood contrast; surface oxidation and grime may mask the original color.
Hardness (Janka)
White Oak: about 1,360 lbf — Hard. Red Oak: about 1,290 lbf — Hard.
Durability & Decay Resistance
White Oak is Durable and naturally rot-resistant; Red Oak is less decay-resistant. The photo does not show enough end grain to confirm which oak.
Value & Age
Roughly US$4–10 per board foot for ordinary kiln-dried oak; reclaimed or selected stock varies widely.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably estimate age from the photo; the worn, gray surface indicates exposure or aging but not a specific duration.
Common Uses
Furniture, flooring, cabinetry, framing, barrels, boat parts, and trim.
Geographic Origin
Oaks are native across much of eastern North America; White Oak is especially common in the eastern and central United States.
Workability
Generally machines and glues well; knots and grain changes can cause tearout. Pre-drilling is useful near edges.
Finish Recommendations
Clean and sand to sound wood, then use oil, shellac, lacquer, or polyurethane; test first because weathering can cause uneven absorption.
Notable Features
Prominent growth rings and knots; oak commonly has visible rays and coarse texture, though these are not clearly resolved here.
