Most likely Red Oak; alternatives include White Oak or another oak species.
Quercus rubra (probable); Quercus alba is a secondary possibility. · Hardwood; domestic temperate species.
AI-generated identification · may be incorrect- Type
- Hardwood; domestic temperate species.
- Origin
- Eastern and central North America, especially the Great Lakes, Appalachians, and eastern United States.
- Hardness
- 1,290 lbf Janka; Hard.
- Durability
- Slightly Durable; generally limited resistance to decay, insects, and prolonged weather exposure compared with white oak.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse, open-pored grain with plain-sawn cathedral tendencies; appears flat-sawn or rift/flat mixed. No distinctive figure visible.
Color & Appearance
Pale pinkish-tan to reddish-brown heartwood with lighter sapwood, modest natural luster, and relatively uniform color. It typically darkens slightly and warms with light exposure.
Hardness (Janka)
1,290 lbf Janka; Hard.
Durability & Decay Resistance
Slightly Durable; generally limited resistance to decay, insects, and prolonged weather exposure compared with white oak.
Value & Age
Approximately US$5–12 per board foot for ordinary kiln-dried clear stock; figured or premium grades can cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from the photograph; the clean faces and sharp edges suggest recently milled or lightly handled stock rather than aged/reclaimed wood.
Common Uses
Furniture, flooring, cabinetry, millwork, veneer, trim, stair parts, and interior construction.
Geographic Origin
Eastern and central North America, especially the Great Lakes, Appalachians, and eastern United States.
Workability
Machines and sands well, though its open pores and coarse grain can tear during planing and require grain-aware cutting. Gluing, screwing, and finishing are generally straightforward.
Finish Recommendations
Sand progressively, fill pores if a smooth surface is desired, then use stain, oil, lacquer, shellac, or polyurethane. Seal end grain carefully for even absorption.
Notable Features
Coarse texture, prominent open pores, strong earlywood/latewood contrast, and characteristic oak ray fleck when quarter-sawn.
