Likely maple, but the image is too low-contrast and featureless for a reliable species identification; birch or another pale, close-grained wood are alternatives. — Acer spp. (tentative); possibly Betula spp.

Likely maple, but the image is too low-contrast and featureless for a reliable species identification; birch or another pale, close-grained wood are alternatives.

Acer spp. (tentative); possibly Betula spp. · Hardwood; species uncertain.

AI-generated identification · may be incorrect
Type
Hardwood; species uncertain.
Origin
If maple, likely North America or other temperate regions; origin cannot be inferred from the image.
Hardness
Maple: about 1,450 lbf (Hard); value varies by species.
Durability
Generally non-durable to slightly durable against decay; species and exposure conditions matter.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Appears straight-grained with fine, subtle lines; no clear figure or cut orientation can be determined.

Color & Appearance

Pale gray-beige, possibly affected by lighting or surface finish; heartwood/sapwood distinction and aging color are not visible.

Hardness (Janka)

Maple: about 1,450 lbf (Hard); value varies by species.

Durability & Decay Resistance

Generally non-durable to slightly durable against decay; species and exposure conditions matter.

Value & Age

Estimated Market ValueNot an official valuation

Typical maple lumber roughly US$4–10 per board foot, varying widely with grade, dimensions, and region.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be estimated from the visible surface; no clear patina, wear, or oxidation indicators.

Common Uses

Furniture, cabinetry, flooring, turning, and interior trim; exact uses depend on species and grade.

Geographic Origin

If maple, likely North America or other temperate regions; origin cannot be inferred from the image.

Workability

Maple generally machines and finishes well, though hard maple can be demanding to cut and may burn or show tearout; predrilling is useful for fasteners.

Finish Recommendations

Sand evenly and apply a clear oil, lacquer, or polyurethane; test first, as pale woods can finish unevenly.

Notable Features

No distinctive scent, figure, pores, or end-grain features are discernible in this image.

Learn more about Likely maple, but the image is too low-contrast and featureless for a reliable species identification; birch or another pale, close-grained wood are alternatives. in the Wood Encyclopedia
Identified September 23, 2026