Likely Honduran mahogany; alternatives include genuine mahogany substitutes such as African mahogany or sapele.
Swietenia macrophylla (likely); Khaya spp. or Entandrophragma cylindricum are alternatives. · Hardwood; tropical/exotic.
AI-generated identification · may be incorrect- Type
- Hardwood; tropical/exotic.
- Origin
- Native primarily to Central and South America, especially Mexico through the Amazon basin; widely plantation-grown elsewhere.
- Hardness
- Approximately 900 lbf Janka—Medium.
- Durability
- Durable; generally good resistance to decay and moderate insect resistance, though performance varies by species and exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine to moderately coarse grain with subtle ribboning and mild interlock; appears flat-sawn or plain-sawn, without prominent figure.
Color & Appearance
Warm pinkish-brown to reddish-brown heartwood with relatively pale sapwood; typically darkens and reddens moderately with age and light, with a subdued natural luster.
Hardness (Janka)
Approximately 900 lbf Janka—Medium.
Durability & Decay Resistance
Durable; generally good resistance to decay and moderate insect resistance, though performance varies by species and exposure.
Value & Age
Roughly $8–$18 per board foot for clear, kiln-dried genuine mahogany; retail figured or premium stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears clean and recently machined, with no reliable visible patina; sample age cannot be estimated from the photograph.
Common Uses
Fine furniture, cabinetry, doors, architectural millwork, boat interiors, veneer, turning, and musical instruments.
Geographic Origin
Native primarily to Central and South America, especially Mexico through the Amazon basin; widely plantation-grown elsewhere.
Workability
Machines, planes, sands, glues, and finishes well; interlocked areas can show minor tear-out, and silica or mineral inclusions may dull tools.
Finish Recommendations
Seal with dewaxed shellac or sanding sealer, then use oil, lacquer, or polyurethane; grain filler can produce a smoother high-gloss surface.
Notable Features
Lightweight for its strength, dimensionally stable, fine-textured, and often pleasantly aromatic when freshly cut.
