Likely oak (Quercus species); the image does not allow reliable distinction between white oak and red oak.
Quercus spp. (exact species uncertain) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Oak species grow widely across the Northern Hemisphere; red and white oaks are native to eastern and central North America.
- Hardness
- Oak varies by species: red oak about 1,290 lbf and white oak about 1,360 lbf; both are Hard.
- Durability
- Species-dependent: white oak is Durable, while red oak is Slightly Durable; exact decay and insect resistance cannot be determined from the image.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
The visible face appears mostly straight-grained; the end grain is too blurred and oblique to assess pores or sawing pattern. No distinctive figure is visible.
Color & Appearance
Pale tan to light brown, with modest variation; finish and lighting may alter the apparent color. Luster and aging are not assessable.
Hardness (Janka)
Oak varies by species: red oak about 1,290 lbf and white oak about 1,360 lbf; both are Hard.
Durability & Decay Resistance
Species-dependent: white oak is Durable, while red oak is Slightly Durable; exact decay and insect resistance cannot be determined from the image.
Value & Age
Rough U.S. retail range: about $5–$12 per board foot for common kiln-dried oak, varying with species, grade, and region.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not estimable from this clean, freshly cut-looking end; no clear patina or wear indicators are visible.
Common Uses
Furniture, flooring, cabinetry, trim, veneer, and—especially for white oak—barrels and boat components.
Geographic Origin
Oak species grow widely across the Northern Hemisphere; red and white oaks are native to eastern and central North America.
Workability
Generally machines and glues well; coarse grain can tear out during planing. Pre-drilling helps with fasteners.
Finish Recommendations
Sand progressively and use oil, shellac, lacquer, or polyurethane; test stain first, as open pores can produce uneven results.
Notable Features
Oak typically has conspicuous pores and strong grain; white oak has tyloses that improve liquid resistance. These features are not clearly resolved here.