Likely red oak; alternatives include white oak or ash
Quercus rubra (probable) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the Appalachian and Great Lakes regions.
- Hardness
- 1,290 lbf Janka; Hard
- Durability
- Slightly durable; limited decay and insect resistance, especially when exposed outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, open-grained, plain-sawn appearance with subtle cathedral figure; no distinctive decorative figure visible.
Color & Appearance
Pale pinkish-tan to light reddish-brown heartwood with lighter sapwood; moderate luster and likely darkening slightly with age.
Hardness (Janka)
1,290 lbf Janka; Hard
Durability & Decay Resistance
Slightly durable; limited decay and insect resistance, especially when exposed outdoors.
Value & Age
Approximately $4–$8 per board foot for ordinary kiln-dried stock; premium clear or wide boards cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably dated from one image; appears relatively fresh or lightly weathered, with minimal patina and no obvious reclaimed-wear indicators.
Common Uses
Furniture, flooring, cabinetry, millwork, veneer, trim, and interior construction.
Geographic Origin
Eastern and central North America, especially the Appalachian and Great Lakes regions.
Workability
Generally machines and sands well, though open pores and occasional tear-out require sharp cutters; glues, screws, and finishes readily.
Finish Recommendations
Sand progressively to about 180–220 grit, then use oil, shellac, lacquer, or polyurethane; grain filler can produce a smoother surface.
Notable Features
Visible open pores and warm reddish tone support red oak; the image does not show end grain clearly enough for confirmation.
