Likely white oak; chestnut oak or another oak is possible. The image shows a weathered, rough-sawn board, but species-level confirmation is limited. — Quercus alba (likely)

Likely white oak; chestnut oak or another oak is possible. The image shows a weathered, rough-sawn board, but species-level confirmation is limited.

Quercus alba (likely) · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America; commonly sourced across the eastern United States.
Hardness
1,360 lbf — Hard
Durability
Durable; white oak heartwood resists decay and insects better than sapwood, and has good weathering resistance.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, coarse grain with visible growth-ring lines; cut and weathering obscure the sawing pattern. No distinctive figure is apparent.

Color & Appearance

Pale tan to light brown, with a darker gray-brown weathered or stained patch. Freshly exposed oak typically darkens toward golden brown with age and light.

Hardness (Janka)

1,360 lbf — Hard

Durability & Decay Resistance

Durable; white oak heartwood resists decay and insects better than sapwood, and has good weathering resistance.

Value & Age

Estimated Market ValueNot an official valuation

Approximately US$5–12 per board foot for common kiln-dried lumber; grade, thickness, and local market affect price.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Not reliably estimable from the image; surface weathering alone does not establish the board’s age.

Common Uses

Furniture, flooring, cabinetry, barrels, interior trim, boatbuilding, and veneer.

Geographic Origin

Eastern and central North America; commonly sourced across the eastern United States.

Workability

Machines and finishes well, though coarse grain can splinter or tear out; predrilling helps with fasteners. Strong tannins may react with iron and stain.

Finish Recommendations

Sand evenly and use oil, lacquer, or polyurethane; test stain first for an even result. Use non-iron contact surfaces to avoid dark tannin stains.

Notable Features

Prominent pores and high tannin content; white oak’s tyloses help make it suitable for liquid-tight cooperage.

Learn more about Likely white oak; chestnut oak or another oak is possible. The image shows a weathered, rough-sawn board, but species-level confirmation is limited. in the Wood Encyclopedia
Identified October 10, 2026