Likely red oak; alternatives include white oak or ash.
Quercus rubra (probable); Quercus alba or Fraxinus spp. possible. · Hardwood; likely domestic North American lumber.
AI-generated identification · may be incorrect- Type
- Hardwood; likely domestic North American lumber.
- Origin
- Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
- Hardness
- 1,290 lbf Janka; Hard.
- Durability
- Slightly durable to moderately durable; suitable primarily for interior use and vulnerable to prolonged moisture, rot, and insects.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse, open grain with pronounced longitudinal pores; appears flat-sawn or plain-sawn, with no obvious decorative figure.
Color & Appearance
Warm pinkish-tan to reddish-brown, with somewhat lighter sapwood and moderate natural luster. Red oak typically darkens slightly and becomes more amber with age and light.
Hardness (Janka)
1,290 lbf Janka; Hard.
Durability & Decay Resistance
Slightly durable to moderately durable; suitable primarily for interior use and vulnerable to prolonged moisture, rot, and insects.
Value & Age
Approximately $4–$9 per board foot for ordinary kiln-dried red oak; figured or select material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The image shows finished, lightly worn lumber but no reliable patina or end-grain evidence; likely modern stock, under roughly 30 years old.
Common Uses
Flooring, furniture, cabinetry, trim, doors, millwork, veneer, and general interior construction.
Geographic Origin
Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
Workability
Machines and sands well, though coarse open grain can tear during planing and requires grain filler for a smooth finish. Glues, screws, and nails reliably with normal predrilling.
Finish Recommendations
Use sanding sealer or grain filler followed by oil, lacquer, shellac, or polyurethane; water-based finishes can emphasize grain contrast and cause slight initial roughness.
Notable Features
Strong earlywood/latewood contrast, coarse texture, prominent pores, and characteristic oak ray fleck when quarter-sawn.
