Most likely red oak; white oak is a possible alternative. The image appears to show an older strip wood floor.
Likely Quercus rubra; alternatively Quercus alba or another oak species. · Hardwood (temperate, not tropical).
AI-generated identification · may be incorrect- Type
- Hardwood (temperate, not tropical).
- Origin
- Oaks are widespread across eastern North America; red oak is especially common in the eastern and central United States and southeastern Canada.
- Hardness
- Red oak: about 1,290 lbf, Hard; white oak: about 1,360 lbf, Hard.
- Durability
- Red oak is slightly durable to non-durable against decay; white oak is durable. Species cannot be confirmed visually from this image.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, prominent longitudinal grain with cathedral-like arcs and varied strip widths; likely flat-sawn boards. No clear decorative figure.
Color & Appearance
Honey-tan to medium brown with darker grain and wear-related variation; oak typically darkens or ambers with age and light exposure. Sapwood and heartwood are not clearly separable here.
Hardness (Janka)
Red oak: about 1,290 lbf, Hard; white oak: about 1,360 lbf, Hard.
Durability & Decay Resistance
Red oak is slightly durable to non-durable against decay; white oak is durable. Species cannot be confirmed visually from this image.
Value & Age
Roughly $4–$10 per board foot for common kiln-dried oak; reclaimed flooring varies considerably by condition and salvage market.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The surface shows wear and patina consistent with an aged floor, but the wood’s age cannot be reliably estimated from the image.
Common Uses
Flooring, furniture, cabinetry, millwork, and general construction; oak is also used for veneer and some cooperage.
Geographic Origin
Oaks are widespread across eastern North America; red oak is especially common in the eastern and central United States and southeastern Canada.
Workability
Machines and finishes well, though open pores need filling for a smooth finish; use sharp tools and predrill near edges to limit splitting.
Finish Recommendations
Clean and sand evenly, then apply compatible floor stain and durable polyurethane or hardwax oil; test stain first because oak absorbs color unevenly.
Notable Features
Visible coarse, open grain and strong growth-ring contrast are oak-like; the image does not show end grain, so pore details cannot confirm species.
