Most likely White Oak; alternatives include European Oak or Ash.
Quercus alba (probable); European oak is Quercus robur/petraea. · Hardwood; temperate North American species.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate North American species.
- Origin
- Eastern and central North America, especially the Appalachian and Great Lakes regions.
- Hardness
- 1,360 lbf Janka; Hard.
- Durability
- Durable, especially heartwood; good resistance to decay and insects, though sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium texture, likely rift- or quarter-sawn; subtle elongated rays are visible, with no obvious decorative figure.
Color & Appearance
Pale tan to gray-brown, with light sapwood and slightly darker heartwood; moderate luster. It commonly amber-darkens mildly with age and light.
Hardness (Janka)
1,360 lbf Janka; Hard.
Durability & Decay Resistance
Durable, especially heartwood; good resistance to decay and insects, though sapwood is less resistant.
Value & Age
Approximately US$6–12 per board foot for clear, kiln-dried solid stock; premium figured or wide boards cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this photograph; the clean surface appears recently machined or refinished rather than visibly aged.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, and general construction.
Geographic Origin
Eastern and central North America, especially the Appalachian and Great Lakes regions.
Workability
Machines, sands, glues, and finishes well, but interlocked grain can tear during planing. Dense fibers may require predrilling for fasteners.
Finish Recommendations
Use a sanding sealer followed by oil, lacquer, shellac, or polyurethane; water-based finishes preserve its lighter color, while oil adds warmth.
Notable Features
Strong ray fleck may appear on quarter-sawn surfaces; open pores and tannins contribute to its characteristic texture and durability.
