Most likely light-colored hardwood such as maple; alternatives include birch or beech. The image alone is insufficient for definitive identification.
Acer spp., most plausibly Acer saccharum; alternatives Betula spp. or Fagus grandifolia. · Hardwood (deciduous).
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous).
- Origin
- Sugar maple: eastern North America; birch and beech alternatives occupy much of northern and eastern North America.
- Hardness
- Sugar maple: about 1,450 lbf Janka—Hard. Birch and beech are similarly hard, roughly 1,260–1,300 lbf.
- Durability
- Slightly Durable to Non-durable outdoors; generally susceptible to decay and insects when exposed to moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine, and subdued, with diffuse-porous texture; slight wavy or cloudy figure is visible. End grain is not adequately shown.
Color & Appearance
Pale cream to light golden-tan with minimal sapwood/heartwood contrast and modest natural luster. It may amber slightly with age and UV exposure.
Hardness (Janka)
Sugar maple: about 1,450 lbf Janka—Hard. Birch and beech are similarly hard, roughly 1,260–1,300 lbf.
Durability & Decay Resistance
Slightly Durable to Non-durable outdoors; generally susceptible to decay and insects when exposed to moisture.
Value & Age
Approximately $4–10 per board foot for clear maple; figured or specialty stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably; the clean, unfinished appearance shows no clear age indicators.
Common Uses
Furniture, cabinetry, flooring, butcher blocks, turnings, handles, and musical instruments.
Geographic Origin
Sugar maple: eastern North America; birch and beech alternatives occupy much of northern and eastern North America.
Workability
Machines, sands, glues, and finishes well, though hard maple can burn during machining and may show blotchy staining.
Finish Recommendations
Use sanding sealer or conditioner before stain; clear lacquer, shellac, oil, or polyurethane all work well.
Notable Features
Dense, fine texture and good wear resistance; visible figure is mild rather than strongly figured.