Most likely eucalyptus (alternative: red gum or another broadleaf tree; species-level identification is uncertain from this rough slice).
Eucalyptus spp. · Hardwood; often classified as exotic/tropical in North American markets.
AI-generated identification · may be incorrect- Type
- Hardwood; often classified as exotic/tropical in North American markets.
- Origin
- Native mainly to Australia and Tasmania, with widely planted stands in California, South America, Africa, and southern Europe.
- Hardness
- Approximately 1,450–2,000 lbf, Hard to Very Hard; highly variable by eucalyptus species.
- Durability
- Moderately Durable to Durable; heartwood commonly resists decay and insects better than sapwood, but performance varies substantially.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Flat-sawn cross-section with diffuse, irregular grain and modest swirling; bark obscures detailed figure. No clear decorative figure is visible.
Color & Appearance
Pale tan to honey-brown wood with darker streaking near bark; moderate luster. It may deepen toward brown-orange with oxidation and light.
Hardness (Janka)
Approximately 1,450–2,000 lbf, Hard to Very Hard; highly variable by eucalyptus species.
Durability & Decay Resistance
Moderately Durable to Durable; heartwood commonly resists decay and insects better than sapwood, but performance varies substantially.
Value & Age
Roughly $6–$15 per board foot for common, dry eucalyptus; figured or properly milled material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The cut surface appears recently exposed; the tree’s age cannot be estimated reliably from this image without counting rings.
Common Uses
Flooring, furniture, cabinetry, posts, pulp, turning, and outdoor applications; selected species are used for specialty lumber.
Geographic Origin
Native mainly to Australia and Tasmania, with widely planted stands in California, South America, Africa, and southern Europe.
Workability
Hard and abrasive; sawing and planing can be challenging, with possible movement and tearout. Pre-drilling is recommended; gluing and sanding are generally satisfactory when dry.
Finish Recommendations
Dry thoroughly, sand progressively, and seal end grain; oil, lacquer, or polyurethane are suitable. Test for uneven absorption and movement on a sample.
Notable Features
Very thick, fibrous, persistent bark and variable interlocked grain are characteristic; many species have a noticeable aromatic oil scent.