Most likely pine, probably Eastern white pine; alternatives include another softwood such as spruce or fir.
Pinus strobus (probable) · Softwood (conifer)
AI-generated identification · may be incorrect- Type
- Softwood (conifer)
- Origin
- Eastern North America, especially the northeastern United States and southeastern Canada; widely plantation-grown elsewhere.
- Hardness
- About 380 lbf Janka; Very Soft.
- Durability
- Slightly Durable; generally vulnerable to decay, insects, and prolonged weather exposure when untreated.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium texture with subtle growth-ring banding; appears flat-sawn. No distinctive figure is visible.
Color & Appearance
Muted tan to gray-brown, likely darkened by stain, oxidation, or age; sapwood/heartwood distinction is unclear. Low visible luster.
Hardness (Janka)
About 380 lbf Janka; Very Soft.
Durability & Decay Resistance
Slightly Durable; generally vulnerable to decay, insects, and prolonged weather exposure when untreated.
Value & Age
Approximately $2–$6 per board foot for ordinary clear pine; reclaimed or select stock may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Indeterminate from the photograph; surface wear and darkening suggest an older finished or reclaimed panel, but not a reliable chronological age.
Common Uses
Interior furniture, shelving, paneling, trim, cabinetry, crates, carving, and general construction.
Geographic Origin
Eastern North America, especially the northeastern United States and southeastern Canada; widely plantation-grown elsewhere.
Workability
Very easy to cut, plane, sand, glue, nail, and screw, though it dents readily and can fuzz or tear around knots; resin may affect blades and finishes.
Finish Recommendations
Clean and lightly sand, then use sanding sealer or conditioner before stain; lacquer, shellac, oil, or polyurethane are suitable. Test compatibility because existing finish or stain may remain.
Notable Features
Lightweight, soft, commonly resinous, and acoustically moderately resonant; the image shows no diagnostic knots or resin pockets.
