Likely Douglas-fir; possibly another regional conifer such as pine or hemlock. The bark and sawn face are not diagnostic enough for certainty.
Pseudotsuga menziesii (if Douglas-fir) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- If Douglas-fir, native to western North America, from British Columbia south through the Pacific Coast and inland western states.
- Hardness
- 660 lbf; Soft (Douglas-fir reference value).
- Durability
- Slightly durable to moderately durable; heartwood has some decay resistance, while sapwood is less resistant to rot and insects.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, with visible growth rings and broad earlywood/latewood contrast; the image shows no distinctive figured grain. The face appears roughly sawn, not enough to establish the cut orientation.
Color & Appearance
Fresh wood appears pale yellow-tan to light brown; heartwood may be more reddish-brown than sapwood. Weathering and oxidation can darken exposed surfaces.
Hardness (Janka)
660 lbf; Soft (Douglas-fir reference value).
Durability & Decay Resistance
Slightly durable to moderately durable; heartwood has some decay resistance, while sapwood is less resistant to rot and insects.
Value & Age
Roughly US$3–8 per board foot for ordinary retail lumber; highly dependent on region, grade, dimensions, and whether it is dried.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from this image; the rough bark and fresh-looking cut surface provide no dependable age indicator.
Common Uses
Framing, beams, millwork, doors, flooring, furniture, and plywood; the pictured piece may be a freshly cut log section.
Geographic Origin
If Douglas-fir, native to western North America, from British Columbia south through the Pacific Coast and inland western states.
Workability
Generally machines and glues well, though resin, knots, and strong earlywood/latewood contrast can cause tearout or uneven sanding; predrilling may help near edges.
Finish Recommendations
Sand evenly and apply a compatible sealer, oil, lacquer, or polyurethane; a conditioner or test coat can help manage uneven absorption.
Notable Features
The bark is thick and furrowed, and the end grain shows conspicuous growth-ring contrast, both consistent with a conifer. No scent or special figure can be assessed from the photo.