Likely birch plywood face veneer; species may be Baltic birch or another birch. The image alone cannot confirm the exact species.
Likely Betula spp.; exact species undetermined. · Engineered (plywood with hardwood veneer).
AI-generated identification · may be incorrect- Type
- Engineered (plywood with hardwood veneer).
- Origin
- Birches occur across temperate and boreal regions of the Northern Hemisphere; Baltic birch plywood is commonly manufactured in Northern and Eastern Europe.
- Hardness
- Birch is about 1,260 lbf Janka (Hard); plywood properties vary by construction.
- Durability
- Slightly Durable; birch is not naturally rot- or weather-resistant, and plywood durability depends on adhesive and grade.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine grain with broad, shallow cathedral arches suggesting flat-sawn veneer; small knots and a repaired or filled defect are visible.
Color & Appearance
Pale cream to light tan with subtle pink-gray tones and modest natural variation. Surface appears matte; light exposure can deepen it toward warmer yellow or amber.
Hardness (Janka)
Birch is about 1,260 lbf Janka (Hard); plywood properties vary by construction.
Durability & Decay Resistance
Slightly Durable; birch is not naturally rot- or weather-resistant, and plywood durability depends on adhesive and grade.
Value & Age
Typical birch plywood varies widely, roughly US$3–10 per square foot for a panel, depending on thickness, grade, and source; not meaningfully priced per board foot.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from the image; the pale, relatively clean face shows no clear evidence of substantial aging.
Common Uses
Cabinetry, furniture, shelving, drawer boxes, interior panels, and utility plywood.
Geographic Origin
Birches occur across temperate and boreal regions of the Northern Hemisphere; Baltic birch plywood is commonly manufactured in Northern and Eastern Europe.
Workability
Cuts and sands cleanly with sharp tools; plywood edges may splinter, and fasteners can split thin veneers. Seal exposed edges and use suitable plywood adhesive for repairs.
Finish Recommendations
Sand lightly without cutting through the veneer, then use a clear water-based finish, lacquer, or polyurethane; test first, as veneer and filler may absorb stain unevenly.
Notable Features
Fine, relatively uniform veneer grain; visible knots and a central filled defect indicate utility rather than clear, premium face grade.