Likely white oak; red oak is a possible alternative.
Quercus alba (likely); Quercus rubra is a possible alternative. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Likely eastern North America; white and red oaks grow widely across the eastern United States and parts of Canada.
- Hardness
- White oak: about 1,360 lbf—Hard. Red oak: about 1,290 lbf—Hard.
- Durability
- White oak is Durable, with good decay resistance; red oak is Slightly Durable and less rot-resistant. Species confirmation is needed.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight to mildly irregular, with prominent rays and flecking visible on the end/face; likely flat- or rift-sawn. No distinctive figured pattern is apparent.
Color & Appearance
Fresh, pale tan to light brown with subtle color variation; oak typically darkens toward golden brown with age and light exposure. Luster appears low to moderate.
Hardness (Janka)
White oak: about 1,360 lbf—Hard. Red oak: about 1,290 lbf—Hard.
Durability & Decay Resistance
White oak is Durable, with good decay resistance; red oak is Slightly Durable and less rot-resistant. Species confirmation is needed.
Value & Age
Typical kiln-dried, clear domestic oak lumber is roughly $5–$12 per board foot, varying by species, grade, thickness, and region.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably estimate from this fresh-looking, planed sample; no clear patina or wear indicators are visible.
Common Uses
Furniture, flooring, cabinetry, millwork, barrels, veneer, and turning.
Geographic Origin
Likely eastern North America; white and red oaks grow widely across the eastern United States and parts of Canada.
Workability
Generally machines and glues well; coarse grain can tear out during planing, and predrilling helps with fasteners. Use sharp cutters for clean results.
Finish Recommendations
Sand progressively and apply oil, shellac, lacquer, or polyurethane; oak’s open pores may be filled for a smoother finish. Test stain first, as it can appear uneven.
Notable Features
The visible ray fleck and coarse, ring-porous texture are consistent with oak. White oak’s pores are often plugged, improving liquid resistance relative to red oak.
