Most likely knotty pine, probably Eastern white pine; alternatives include lodgepole or ponderosa pine.
Pinus strobus (probable); Pinus contorta or Pinus ponderosa possible. · Softwood (conifer); likely domestic North American lumber.
AI-generated identification · may be incorrect- Type
- Softwood (conifer); likely domestic North American lumber.
- Origin
- Eastern North America if white pine; lodgepole and ponderosa alternatives originate mainly in western North America.
- Hardness
- Janka about 380 lbf—Very Soft.
- Durability
- Slightly Durable; untreated pine has limited resistance to rot, insects, and weathering, though interior use is appropriate.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-grained, flat-sawn boards with prominent sound knots and occasional cathedral grain; no distinctive figured pattern.
Color & Appearance
Pale cream to light yellow heartwood and nearly white sapwood, with reddish-brown knots and resin streaks. It darkens modestly to warm golden honey with light exposure.
Hardness (Janka)
Janka about 380 lbf—Very Soft.
Durability & Decay Resistance
Slightly Durable; untreated pine has limited resistance to rot, insects, and weathering, though interior use is appropriate.
Value & Age
Approximately $3–8 per board foot for clear/knotty kiln-dried pine; finished doorwork is valued separately.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The sample appears relatively recent, likely under 20 years old; finish, installation age, and exposure prevent a reliable age estimate.
Common Uses
Interior doors, cabinetry, paneling, trim, furniture, shelving, framing, and carving.
Geographic Origin
Eastern North America if white pine; lodgepole and ponderosa alternatives originate mainly in western North America.
Workability
Very easy to cut, plane, sand, glue, and fasten, but soft fibers dent readily; resin and knots may cause tear-out or dull blades.
Finish Recommendations
Seal knots with shellac-based knot sealer, then apply clear lacquer, varnish, or water- or oil-based polyurethane; preconditioning helps reduce uneven absorption.
Notable Features
Light weight, pleasant resinous scent, visible knots, and frequent pitch pockets; knot placement suggests decorative knotty-pine paneling.
