Unidentified; likely a weathered softwood such as pine or Douglas fir. The photo does not show enough diagnostic detail to distinguish species.
Pinus spp. or Pseudotsuga menziesii (alternatives; uncertain) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Could be North American pine or Douglas fir; exact native range cannot be established from the image.
- Hardness
- Pine varies by species (about 380–870 lbf); Douglas fir is about 660 lbf. Generally Very Soft to Soft under the requested scale.
- Durability
- Species-dependent; typically Slightly to Moderately Durable outdoors without treatment, with limited rot and insect resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Broad, mostly straight longitudinal grain with pronounced saw marks and surface checking; no distinctive figure or end grain is visible.
Color & Appearance
Weathered tan to light brown, with darker streaks and uneven discoloration. Original heartwood/sapwood colors and aging shift cannot be determined from this surface.
Hardness (Janka)
Pine varies by species (about 380–870 lbf); Douglas fir is about 660 lbf. Generally Very Soft to Soft under the requested scale.
Durability & Decay Resistance
Species-dependent; typically Slightly to Moderately Durable outdoors without treatment, with limited rot and insect resistance.
Value & Age
Roughly $2–$8 per board foot for common construction-grade softwood; species, grade, and region can change this substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Indeterminate; surface weathering and abrasion are visible, but they do not establish the sample’s age.
Common Uses
Depending on species: framing, sheathing, furniture, cabinetry, trim, and general construction.
Geographic Origin
Could be North American pine or Douglas fir; exact native range cannot be established from the image.
Workability
Usually easy to cut, plane, sand, and fasten; resin, knots, and grain tearout may vary by species. The rough, marked surface needs flattening before finish work.
Finish Recommendations
Sand to clean, sound wood, then use a compatible sealer and oil or clear film finish; weathered discoloration may remain uneven.
Notable Features
Visible crosshatched saw marks, scratches, and surface checks; no reliable scent, resin, or end-grain cues are shown.