Likely knotty pine; possibly another softwood such as western red cedar or Douglas fir. The image shows decorative paneling, not enough diagnostic detail for a definitive species ID.
Likely Pinus spp. (pine); exact species undetermined. · Softwood (conifer).
AI-generated identification · may be incorrect- Type
- Softwood (conifer).
- Origin
- Pines grow widely across the Northern Hemisphere; the particular species and source cannot be determined visually.
- Hardness
- If pine: commonly about 380–870 lbf depending on species; ranges from Very Soft to Medium.
- Durability
- Generally Non-durable to Slightly Durable untreated; knots and species affect performance, and exterior weathering resistance is limited.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight grain with prominent knots and localized irregular, swirling grain; panels appear flat-sawn. No clear evidence of special figure.
Color & Appearance
Golden tan to honey-brown with darker brown streaks around knots; likely deepened by finish and aging. Sapwood/heartwood distinction is not clear in the image.
Hardness (Janka)
If pine: commonly about 380–870 lbf depending on species; ranges from Very Soft to Medium.
Durability & Decay Resistance
Generally Non-durable to Slightly Durable untreated; knots and species affect performance, and exterior weathering resistance is limited.
Value & Age
Typical clear or knotty pine lumber is roughly US$3–8 per board foot retail; finished architectural panels vary substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably estimate age from this finished panel; the warm color may result from finish or light exposure rather than age.
Common Uses
Interior paneling, furniture, cabinetry, trim, doors, and general construction.
Geographic Origin
Pines grow widely across the Northern Hemisphere; the particular species and source cannot be determined visually.
Workability
Usually easy to cut, plane, sand, and glue; knots may cause tearout or uneven finishing, and soft grain can dent easily.
Finish Recommendations
Seal knots if resin bleed is a concern; use a conditioner or sealer before stain to reduce blotching, then apply a clear varnish or polyurethane.
Notable Features
Visible knots and contrasting grain create a rustic appearance; pine may have a mild resinous scent, though none can be assessed from the image.