Most likely American white oak; alternatives include red oak or white ash.
Quercus alba (probable) · Hardwood; temperate North American.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate North American.
- Origin
- Eastern and central North America, especially the eastern United States.
- Hardness
- 1,360 lbf Janka — Hard.
- Durability
- Durable; heartwood has good decay and weathering resistance, while sapwood is considerably less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium texture, apparently plain-sawn or rift/quarter-oriented; no obvious figure visible. End grain is not shown, limiting confirmation.
Color & Appearance
Light tan to pale brown with subtle gray-beige variation and moderate luster; white-oak heartwood commonly deepens toward warm golden brown with age and light.
Hardness (Janka)
1,360 lbf Janka — Hard.
Durability & Decay Resistance
Durable; heartwood has good decay and weathering resistance, while sapwood is considerably less resistant.
Value & Age
Approximately $6–$12 per board foot for clear kiln-dried lumber; premium figured or wide stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from this clean, apparently unfinished surface; it shows little visible patina or wear.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, boat components, and general construction.
Geographic Origin
Eastern and central North America, especially the eastern United States.
Workability
Generally machines, sands, glues, and finishes well, though interlocked grain can cause localized tear-out; tannins may darken around iron fasteners.
Finish Recommendations
Sand carefully and apply a sanding sealer or washcoat; oil, shellac, lacquer, or polyurethane are suitable. Water-based finishes may raise grain and should follow thorough sanding.
Notable Features
Open pores, prominent medullary-ray fleck on quarter-sawn material, substantial weight, and characteristic oak ray structure; these are not clearly visible here.
