Likely eastern white pine; other possibilities include ponderosa pine or another light-colored pine.
Pinus strobus (likely; species cannot be confirmed from this view). · Softwood (conifer).
AI-generated identification · may be incorrect- Type
- Softwood (conifer).
- Origin
- Eastern North America, from the northeastern United States and southeastern Canada south through the Appalachians.
- Hardness
- 380 lbf, Very Soft (eastern white pine; approximate).
- Durability
- Slightly Durable; untreated wood has limited resistance to decay and insects, especially outdoors or in ground contact.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-moderate grain with subtle growth-ring bands and a few small knots; appears flat-sawn. No distinctive figured pattern is visible.
Color & Appearance
Pale cream to light yellow-tan with slight pinkish/brown variation; the face appears matte and unfinished. Pine typically yellows and deepens with light and age.
Hardness (Janka)
380 lbf, Very Soft (eastern white pine; approximate).
Durability & Decay Resistance
Slightly Durable; untreated wood has limited resistance to decay and insects, especially outdoors or in ground contact.
Value & Age
Roughly $3–8 per board foot for common kiln-dried pine, varying with grade, dimensions, and region.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this image; the clean, pale surface shows little visible patina or wear.
Common Uses
Interior trim, cabinetry, furniture, shelving, paneling, carving, and general construction.
Geographic Origin
Eastern North America, from the northeastern United States and southeastern Canada south through the Appalachians.
Workability
Light and easy to saw, plane, sand, glue, and fasten; soft fibers dent readily, and resin or knots can complicate machining and finishing.
Finish Recommendations
Sand evenly and use a sealer or conditioner before stain to reduce blotching; clear varnish, lacquer, or oil suits a natural finish.
Notable Features
Low density and relatively easy carving; visible knots and resin pockets may occur, though none are prominent here.
