Likely oak, most plausibly white oak; red oak is a visual alternative.
Quercus alba (likely); Quercus rubra is a possible alternative. · Hardwood; likely domestic oak.
AI-generated identification · may be incorrect- Type
- Hardwood; likely domestic oak.
- Origin
- Likely eastern North America; oak is also widely grown and milled across the United States.
- Hardness
- White oak: about 1,360 lbf, Hard. Red oak: about 1,290 lbf, Hard.
- Durability
- White oak heartwood is Durable, with good decay resistance; red oak is less decay-resistant. The pictured finish and condition limit assessment of this particular piece.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent, mostly straight grain with broad cathedral-like figure on the panels; the photo does not clearly show ray fleck or end grain.
Color & Appearance
Weathered gray-brown surfaces contrast with warmer tan areas, likely from wear or uneven aging. Oak typically darkens and warms with exposure; finish and lighting affect the appearance.
Hardness (Janka)
White oak: about 1,360 lbf, Hard. Red oak: about 1,290 lbf, Hard.
Durability & Decay Resistance
White oak heartwood is Durable, with good decay resistance; red oak is less decay-resistant. The pictured finish and condition limit assessment of this particular piece.
Value & Age
Roughly US$5–12 per board foot for ordinary domestic oak lumber; finished furniture value depends on construction, condition, and provenance.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably date from the image; the worn, gray patina suggests use or finish aging, not a specific age.
Common Uses
Furniture, cabinetry, flooring, trim, veneer, and interior millwork.
Geographic Origin
Likely eastern North America; oak is also widely grown and milled across the United States.
Workability
Machines and finishes well, though grain can tear during planing; predrilling helps with fasteners. Open pores may need filling for a smooth finish.
Finish Recommendations
Clean gently, test a small area, then use a compatible clear finish or oil; pore filler can provide a smoother surface. Preserve the patina if refinishing is not desired.
Notable Features
Visible coarse grain and strong growth-ring contrast are consistent with oak; the image does not establish species or cut with certainty.
