Likely a softwood, possibly pine; species cannot be reliably identified from this photo. Spruce or fir are alternatives.
Pinus spp. (tentative; exact species undetermined) · Softwood (conifer)
AI-generated identification · may be incorrect- Type
- Softwood (conifer)
- Origin
- Pines grow across much of the Northern Hemisphere; origin cannot be inferred from the image.
- Hardness
- Species-dependent: common pines range roughly 380–870 lbf, from Very Soft to Medium.
- Durability
- Generally Slightly Durable to Non-durable untreated; resistance varies by pine species and heartwood content.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, parallel longitudinal grain on a rounded cross-section; no distinctive figure is visible. The image does not show a clear end-grain view.
Color & Appearance
Light tan to warm yellow-brown with subtle tonal variation and small dark knots or marks; surface appears matte. Aging and light-related color change cannot be judged confidently.
Hardness (Janka)
Species-dependent: common pines range roughly 380–870 lbf, from Very Soft to Medium.
Durability & Decay Resistance
Generally Slightly Durable to Non-durable untreated; resistance varies by pine species and heartwood content.
Value & Age
Common pine lumber is often about US$2–$6 per board foot retail; grade, region, and dimensions affect price.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not estimable from appearance; no clear patina or wear indicators are visible.
Common Uses
Depending on species: framing, trim, furniture, cabinetry, paneling, and turning.
Geographic Origin
Pines grow across much of the Northern Hemisphere; origin cannot be inferred from the image.
Workability
Usually easy to cut and sand; resin, knots, and soft earlywood can cause uneven planing or finishing. Pre-drilling near edges can help prevent splitting.
Finish Recommendations
Sand evenly and use a compatible sealer or conditioner before stain to reduce blotching; clear oil, lacquer, or polyurethane are options.
Notable Features
Visible small knots and straight grain are consistent with common softwood lumber, but are not diagnostic.