Most likely White Oak; alternatives include Red Oak or European Oak.
Quercus alba (alternatives: Quercus rubra or Quercus robur). · Hardwood; temperate ring-porous species.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate ring-porous species.
- Origin
- Eastern and central North America; comparable European Oak grows across Europe and western Asia.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard.
- Durability
- Durable; good resistance to decay and insects when heartwood is exposed, though not indefinitely weatherproof without protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, long-grained, with prominent latewood streaks; likely plainsawn or riftsawn. No obvious decorative figure.
Color & Appearance
Pale beige to light brown heartwood with slightly lighter sapwood and subdued grain contrast; typically darkens modestly to golden tan with age and light.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; good resistance to decay and insects when heartwood is exposed, though not indefinitely weatherproof without protection.
Value & Age
Approximately $5–$12 per board foot for ordinary clear White Oak; premium quarter-sawn stock may cost substantially more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this image; the pale, clean surface suggests recently milled or lightly aged wood rather than strongly weathered material.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, interior trim, and boat construction.
Geographic Origin
Eastern and central North America; comparable European Oak grows across Europe and western Asia.
Workability
Machines and sands well, but its hardness can blunt tools; open pores may cause tear-out and require grain-aware planing. Glues, screws, and finishes reliably, with predrilling recommended.
Finish Recommendations
Use sanding sealer or pore filler for a smoother finish, followed by oil, lacquer, shellac, or polyurethane. Test stain first because oak can absorb unevenly.
Notable Features
Visible open-pore texture and strong earlywood/latewood contrast are characteristic of oak; quarter-sawn stock would show medullary ray fleck.
