Likely White Oak; alternatives include Red Oak or Ash
Quercus alba (likely); Quercus rubra or Fraxinus spp. possible · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the United States
- Hardness
- 1,360 lbf Janka — Hard
- Durability
- Durable; white oak has good decay and weather resistance, while red oak is less resistant
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent straight grain with cathedral figure, likely flat-sawn; visible large earlywood pores and medullary-ray flecking near the top
Color & Appearance
Pale cream to light tan with slightly darker brown heartwood; moderate luster and subtle darkening/ambering with age
Hardness (Janka)
1,360 lbf Janka — Hard
Durability & Decay Resistance
Durable; white oak has good decay and weather resistance, while red oak is less resistant
Value & Age
Approximately US$6–12 per board foot for clear, kiln-dried white oak; small turning blanks vary widely
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears recently machined and lightly finished; no reliable evidence indicates substantial age
Common Uses
Furniture, flooring, cabinetry, barrels, turned objects, trim, and boatbuilding
Geographic Origin
Eastern and central North America, especially the United States
Workability
Machines and sands well, though pronounced grain can cause localized tearout; strong, dense fibers hold screws and glue reliably after proper surface preparation
Finish Recommendations
Seal end grain, then use oil, shellac, lacquer, or polyurethane; water-based finishes preserve the pale color, while oil adds warmth
Notable Features
Open-pored texture, strong cathedral figure, visible rays, and substantial weight; the rounded form is consistent with turned oak
