Most likely Eastern white pine; other light-colored softwoods, such as spruce or fir, cannot be ruled out from this rough, weathered image.
Pinus strobus (probable) · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Eastern North America, from the Great Lakes and northeastern United States into southeastern Canada and the Appalachians.
- Hardness
- About 380 lbf; Very Soft (Eastern white pine).
- Durability
- Slightly Durable; untreated wood has limited decay and insect resistance, especially outdoors or in contact with moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Long, mostly straight grain with broad, uneven splits and torn fibers; the rough-sawn surfaces obscure finer figure and cut orientation.
Color & Appearance
Pale cream to light yellow-tan, with little visible heartwood–sapwood distinction in the split pieces. Surface dirt and oxidation mute the color; fresh cuts would appear lighter.
Hardness (Janka)
About 380 lbf; Very Soft (Eastern white pine).
Durability & Decay Resistance
Slightly Durable; untreated wood has limited decay and insect resistance, especially outdoors or in contact with moisture.
Value & Age
Roughly $2–$6 per board foot for ordinary new pine; irregular split or scrap pieces may have little resale value.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from the image; roughness, discoloration, and damage do not establish the wood’s age.
Common Uses
Framing, boards, trim, furniture, boxes, carving, and pulp; these pieces appear to be rough split or scrap stock.
Geographic Origin
Eastern North America, from the Great Lakes and northeastern United States into southeastern Canada and the Appalachians.
Workability
Generally easy to cut, plane, sand, and fasten, but this split, damaged stock may splinter or tear out; soft fibers can dent readily.
Finish Recommendations
Sand sound surfaces and use a sealer or conditioner before stain to reduce blotching; oil, shellac, lacquer, or clear polyurethane are suitable.
Notable Features
Lightweight, pale wood with typically straight grain; the visible splits and fibrous tears are consistent with softwood but are not species-specific.