Most likely maple; possibly hard maple (sugar maple), though the image is insufficient to rule out birch or another pale hardwood.
Likely Acer saccharum; species-level identification is uncertain from this finished table. · Hardwood (angiosperm).
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm).
- Origin
- If hard maple, native to eastern North America, especially the northeastern United States and southeastern Canada.
- Hardness
- Hard maple: about 1,450 lbf, Hard. Other maple species vary.
- Durability
- Slightly Durable; untreated maple is not notably resistant to decay or insects, so indoor use is typical.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine and subtle grain; the broad tabletop appears flat-sawn. No distinctive figure is visible.
Color & Appearance
Pale cream to light yellow-brown with slight variation and low-to-moderate luster. The unfinished or lightly finished surface may yellow with age and light exposure.
Hardness (Janka)
Hard maple: about 1,450 lbf, Hard. Other maple species vary.
Durability & Decay Resistance
Slightly Durable; untreated maple is not notably resistant to decay or insects, so indoor use is typical.
Value & Age
Typical clear maple lumber: roughly US$5–12 per board foot, varying by region, grade, and thickness; a finished table's value depends on workmanship and construction.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from the image; the clean, pale surface shows little obvious patina or wear.
Common Uses
Furniture, cabinetry, flooring, work surfaces, turning, and musical instruments.
Geographic Origin
If hard maple, native to eastern North America, especially the northeastern United States and southeastern Canada.
Workability
Generally machines and sands cleanly; hard maple can be demanding to cut and may burn or show machining marks. Pre-drilling helps with fasteners; glue and finish readily.
Finish Recommendations
Use a clear water-based finish to limit yellowing, or oil/polyurethane for a warmer tone; sand evenly and apply a test coat to check color.
Notable Features
Fine, even texture and understated grain suit a clean, uniform appearance. No strong figure or distinctive scent is evident.