Most likely White Oak; alternatives include Red Oak or Ash. — Quercus alba (likely); Quercus rubra or Fraxinus spp. possible.

Most likely White Oak; alternatives include Red Oak or Ash.

Quercus alba (likely); Quercus rubra or Fraxinus spp. possible. · Hardwood.

AI-generated identification · may be incorrect
Type
Hardwood.
Origin
Eastern and central North America, especially the eastern United States.
Hardness
White Oak: about 1,360 lbf Janka—Hard.
Durability
Durable; good resistance to decay compared with many domestic hardwoods, though untreated exposure will weather and eventually deteriorate.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, fine-to-medium texture, apparently flat-sawn or plain-sawn; little visible figure and no clear medullary rays in this view.

Color & Appearance

Pale beige to light gray-brown heartwood with minimal sapwood contrast and subdued luster; likely darkens slightly amber-brown with age and finish.

Hardness (Janka)

White Oak: about 1,360 lbf Janka—Hard.

Durability & Decay Resistance

Durable; good resistance to decay compared with many domestic hardwoods, though untreated exposure will weather and eventually deteriorate.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$12 per board foot for ordinary kiln-dried clear White Oak; figured or premium stock may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from this clean, unfinished face; it appears relatively fresh or lightly aged, without diagnostic patina or wear.

Common Uses

Furniture, flooring, cabinetry, millwork, veneer, barrels, interior joinery, and general construction.

Geographic Origin

Eastern and central North America, especially the eastern United States.

Workability

Machines and sands well but can show moderate planing tear-out; predrilling is advisable, and tannins may react with iron fasteners or finishes.

Finish Recommendations

Use a penetrating oil, clear lacquer, or polyurethane after thorough sanding; water-based finishes preserve the pale color, while oil adds warmth.

Notable Features

Open pores and relatively prominent latewood are consistent with oak, though the image does not show end grain clearly enough for confirmation.

Learn more about Most likely White Oak; alternatives include Red Oak or Ash. in the Wood Encyclopedia
Identified September 5, 2026

Encyclopedia

Learn about Most Likely White Oak; Alternatives Include Red Oak Or Ash. in the encyclopedia

View all →