Most likely genuine Mahogany; alternatives include African Mahogany or Sapele.
Swietenia macrophylla (likely); Khaya spp. or Entandrophragma cylindricum are alternatives. · Hardwood; commonly classified as tropical/exotic.
AI-generated identification · may be incorrect- Type
- Hardwood; commonly classified as tropical/exotic.
- Origin
- Central and South America, especially the Amazon basin; plantation-grown material is also common.
- Hardness
- Approximately 900 lbf Janka; Medium hardness.
- Durability
- Moderately Durable to Durable; heartwood generally resists decay and insects better than sapwood, but outdoor longevity depends on exposure and finish.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, moderately coarse grain with subtle ribboning and occasional interlock; appears flat-sawn or plain-sawn, without prominent figure.
Color & Appearance
Warm pinkish-brown to reddish-brown heartwood with relatively pale sapwood; naturally darkens and reddens with light exposure, with moderate luster.
Hardness (Janka)
Approximately 900 lbf Janka; Medium hardness.
Durability & Decay Resistance
Moderately Durable to Durable; heartwood generally resists decay and insects better than sapwood, but outdoor longevity depends on exposure and finish.
Value & Age
Roughly $8–$20 per board foot for ordinary kiln-dried stock; figured or certified material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from the photograph; it appears recently milled with little oxidation or wear.
Common Uses
Furniture, cabinetry, doors, trim, boat interiors, veneers, turning, and musical instruments.
Geographic Origin
Central and South America, especially the Amazon basin; plantation-grown material is also common.
Workability
Generally easy to saw, plane, rout, sand, glue, and screw; interlocked areas can tear out, and silica or dull tooling may cause occasional edge dulling.
Finish Recommendations
Sand progressively to 180–220 grit, seal porous end grain, then use oil, shellac, lacquer, or polyurethane; test for color and absorption on an offcut.
Notable Features
Lightweight for its strength, dimensionally stable, and often pleasantly aromatic when freshly worked; visible pores and ribboning support a mahogany identification.
