Most likely White Oak; alternatives include Red Oak or Ash. — Quercus alba (likely); Quercus rubra or Fraxinus spp. possible.

Most likely White Oak; alternatives include Red Oak or Ash.

Quercus alba (likely); Quercus rubra or Fraxinus spp. possible. · Hardwood.

AI-generated identification · may be incorrect
Type
Hardwood.
Origin
Eastern and central North America, especially the Appalachian, Midwest, and eastern woodland regions.
Hardness
White Oak: about 1,360 lbf Janka—Hard.
Durability
Durable; heartwood has good decay and insect resistance, while sapwood is less resistant.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, open-pored grain with subtle cathedral/flat-sawn figure and occasional irregular streaking; no obvious rays visible.

Color & Appearance

Pale cream to light tan with slightly darker brown grain lines; sapwood and heartwood are not strongly contrasted. It may amber modestly with age and light.

Hardness (Janka)

White Oak: about 1,360 lbf Janka—Hard.

Durability & Decay Resistance

Durable; heartwood has good decay and insect resistance, while sapwood is less resistant.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$12 per board foot for clear, kiln-dried White Oak; figured or premium stock may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from this finished, lightly weathered-looking surface; likely newer stock rather than visibly antique.

Common Uses

Furniture, flooring, cabinetry, millwork, veneer, barrels, and general construction.

Geographic Origin

Eastern and central North America, especially the Appalachian, Midwest, and eastern woodland regions.

Workability

Machines and sands well, though open pores and occasional grain reversal can cause tear-out. Pre-drilling is advisable; it glues and finishes reliably.

Finish Recommendations

Sand evenly and fill pores if a smooth surface is desired; use oil, lacquer, shellac, or polyurethane. A conditioner or washcoat can reduce uneven absorption.

Notable Features

Distinctive open pores, attractive grain, substantial weight, and good dimensional stability relative to many oaks.

Learn more about Most likely White Oak; alternatives include Red Oak or Ash. in the Wood Encyclopedia
Identified September 5, 2026

Encyclopedia

Learn about Most Likely White Oak; Alternatives Include Red Oak Or Ash. in the encyclopedia

View all →