Most likely White Oak; alternatives include Red Oak or ash.
Quercus alba (probable); Quercus rubra or Fraxinus spp. possible. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the eastern United States.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good decay resistance, while sapwood is less resistant. Indoor display use avoids most weathering concerns.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, coarse, open-pored grain with prominent cathedral-like figure on the broad face, consistent with flat-sawn stock.
Color & Appearance
Pale tan to light brown with darker linear grain; modest natural luster. Oak generally ambers and deepens slightly with light exposure.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good decay resistance, while sapwood is less resistant. Indoor display use avoids most weathering concerns.
Value & Age
Approximately US$6–12 per board foot for ordinary surfaced white oak; figured or premium stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears relatively clean and recently finished; visible appearance cannot establish tree age or manufacture date.
Common Uses
Furniture, flooring, cabinetry, architectural trim, barrels, veneer, and joinery.
Geographic Origin
Eastern and central North America, especially the eastern United States.
Workability
Machines and sands well, though open pores and occasional grain reversal can cause tear-out; predrilling is useful for fasteners. Gluing is generally straightforward.
Finish Recommendations
Use sanding sealer followed by oil, lacquer, shellac, or polyurethane; grain filler gives a smoother surface. Test finishes because oak pores can darken unevenly.
Notable Features
Distinctive open pores, strong ray fleck when quarter-sawn, substantial weight, and good dimensional stability.
