Likely White Oak; alternatives include Red Oak or European Oak — Quercus alba (likely)

Likely White Oak; alternatives include Red Oak or European Oak

Quercus alba (likely) · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America; similar appearance may indicate European oak from Europe.
Hardness
1,360 lbf Janka — Hard
Durability
Durable; heartwood has good resistance to decay and insects, though sapwood is less resistant and prolonged weather exposure requires protection.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Straight, open-grained, predominantly plain-sawn with cathedral patterns; some boards show rift/quarter-sawn ray fleck.

Color & Appearance

Pale tan to honey-brown heartwood with lighter sapwood, moderate luster, and natural tonal variation. It typically darkens slightly and becomes warmer with age and light.

Hardness (Janka)

1,360 lbf Janka — Hard

Durability & Decay Resistance

Durable; heartwood has good resistance to decay and insects, though sapwood is less resistant and prolonged weather exposure requires protection.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–12 per board foot for ordinary kiln-dried white oak; flooring value varies by grade and finish.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
The flooring appears installed and moderately aged, likely roughly 10–40 years; surface wear and oxidation suggest use but not reliably a specific age.

Common Uses

Flooring, furniture, cabinetry, millwork, stairs, barrels, veneer, and general construction.

Geographic Origin

Eastern and central North America; similar appearance may indicate European oak from Europe.

Workability

Machines and sands well, but interlocked grain can tear out; tannins may react with iron fasteners and gluing requires clean, properly prepared surfaces.

Finish Recommendations

Screen or sand evenly, then use penetrating oil, hardwax oil, water- or oil-based polyurethane, or lacquer. Test stains because oak absorbs unevenly.

Notable Features

Visible medullary-ray fleck and prominent earlywood pores support oak identification; substantial seasonal movement is typical.

Learn more about Likely White Oak; alternatives include Red Oak or European Oak in the Wood Encyclopedia
Identified September 17, 2026