Likely birch plywood; the face veneer may be birch, but the image does not establish the species reliably.
Likely Betula spp. (birch); exact species cannot be determined visually. · Engineered—likely plywood with a birch face veneer.
AI-generated identification · may be incorrect- Type
- Engineered—likely plywood with a birch face veneer.
- Origin
- Birches are native across temperate and boreal regions of the Northern Hemisphere; commercial plywood may use other species or mixed veneers.
- Hardness
- Birch is typically about 1,260 lbf Janka—Hard; plywood properties vary with species and construction.
- Durability
- Slightly Durable; birch has limited natural resistance to decay and insects, especially when exposed to moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, subtle grain with small knots; the broad face appears flat-sawn. No distinctive figure is visible.
Color & Appearance
Pale cream to light tan with mild pink-brown variation and a subdued luster; the surface appears aged or discolored, though lighting may contribute.
Hardness (Janka)
Birch is typically about 1,260 lbf Janka—Hard; plywood properties vary with species and construction.
Durability & Decay Resistance
Slightly Durable; birch has limited natural resistance to decay and insects, especially when exposed to moisture.
Value & Age
Typical birch plywood varies widely by thickness and grade; roughly US$2–$6 per square foot retail, not meaningfully priced by board foot.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from this image; surface marks alone do not establish age.
Common Uses
Plywood is commonly used for cabinetry, furniture, shelving, interior panels, and drawer components.
Geographic Origin
Birches are native across temperate and boreal regions of the Northern Hemisphere; commercial plywood may use other species or mixed veneers.
Workability
Generally machines and sands well; plywood edges may splinter, so use sharp blades and support the veneer. Standard woodworking adhesives and fasteners are commonly used.
Finish Recommendations
Sand lightly and evenly, then apply a compatible clear water-based finish, lacquer, or polyurethane; test first because veneer is thin and may absorb unevenly.
Notable Features
Visible knots and veneer-like panel construction suggest plywood rather than solid lumber; no clear end grain is shown.
