Most likely Eastern white pine; alternatives include ponderosa pine or other soft pine.
Pinus strobus (probable) · Softwood (conifer)
AI-generated identification · may be incorrect- Type
- Softwood (conifer)
- Origin
- Eastern North America, especially the northeastern United States and southeastern Canada; widely plantation-grown elsewhere.
- Hardness
- Janka about 380 lbf — Very Soft.
- Durability
- Non-durable to slightly durable; limited resistance to decay, insects, and weathering when exposed outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, coarse, and prominently flat-sawn with cathedral-like growth bands; resin pockets or knots are visible, with no decorative figure.
Color & Appearance
Pale cream to light yellow-brown heartwood with lighter sapwood; subdued luster and gradual ambering with age and light.
Hardness (Janka)
Janka about 380 lbf — Very Soft.
Durability & Decay Resistance
Non-durable to slightly durable; limited resistance to decay, insects, and weathering when exposed outdoors.
Value & Age
Approximately $2–$6 per board foot for clear, usable pine; rustic or knotty stock is commonly less.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears weathered or oxidized but not reliably dateable from this image; likely years to decades old rather than freshly milled.
Common Uses
Interior trim, furniture, shelving, cabinetry, paneling, crates, carving, and general construction.
Geographic Origin
Eastern North America, especially the northeastern United States and southeastern Canada; widely plantation-grown elsewhere.
Workability
Very easy to saw, plane, sand, glue, and fasten, though its softness permits dents and its resin can gum abrasives or blades; knots may cause localized tearout.
Finish Recommendations
Use a sanding sealer or washcoat to reduce uneven absorption, then apply shellac, lacquer, oil, or water/oil-based polyurethane; sanding to 150–180 grit is suitable.
Notable Features
Lightweight, warm-toned, aromatic resinous scent, and prominent dark knots with occasional resin pockets.
